Medium-Voltage Switchgear 8DJH up to 24kV Short Operating Instructions for L 1.1 Panels; Order No. 500-8692.9; Rev.: 000 Danger! ! These short instructions are only an extract of the 8DJH operating instructions, order no. 500-8384.9. Please make yourself familiar with the contents of the operating instructions before operation. Closing the feeder Initial position ⇒ Push control gate of disconnector upwards. Actuating opening for disconnector is free. ⇒ Insert operating lever and turn 70° clockwise. Three-position switch closes. ⇒ Remove operating lever. ⇒ Control gate of disconnector moves to center position automatically. Actuating opening is closed. ⇒ Remove protective cap. ⇒ Insert hand crank. ⇒ Turn hand crank clockwise End position until the "spring charged" indication appears in the inspection window. ⇒ Remove hand crank. ⇒ Circuit-breaker closing spring is charged. Actuate ON pushbutton. Opening the feeder Initial position ⇒ Actuate OFF pushbutton of circuit-breaker ⇒ Push control gate of disconnector upwards. Actuating opening for disconnector is free. End position ⇒ Insert operating lever and turn 70° counter-clockwise. Three-position switch opens. ⇒ Remove operating lever. ⇒ Control gate of disconnector moves to center position automatically. Actuating opening is closed. Page 1/2 Medium-Voltage Switchgear 8DJH up to 24kV Short Operating Instructions for L 1.1 Panels; Order No. 500-8692.9; Rev.: 000 Danger! ! These short instructions are only an extract of the 8DJH operating instructions, . order no. 500-8384.9 Please make yourself familiar with the contents of the operating instructions before operation. Feeder earthing Initial position ⇒ Push control gate of disconnector downwards. Actuating opening is free. ⇒ Insert operating lever and turn 55° clockwise. Earthing switch closes. End position ⇒ Remove operating lever. ⇒ Control gate moves to center position automatically. Actuating opening is closed. Feeder de-earthing Initial position ⇒ Push control gate of disconnector downwards. Actuating opening for earthing switch is free. ⇒ Insert operating lever and turn 55° counter-clockwise. Earthing switch opens. End position ⇒ Remove operating lever. ⇒ Control gate moves to center position automatically. Actuating opening is closed Page 2/2