APPLICATION FORM
BUILDING INFORMATION MODEL (BIM) FUND
INSTRUCTION
(PLEASE READ THE FOLLOWING BEFORE FILLING UP THE APPLICATION FORM)
1. Applicant is to submit the BIM funding application and get BCA in-principle
approval first before committing or signing any contract with the software
vendor or service provider.
2. Eligibility criteria: Applicant must be Singapore-registered firm, and
Applicant must be a member of an on-going or upcoming
construction project.
3. Applicant can apply for either Firm Level or Project Collaboration Schemes up to 6
times.
4. Firm Level Scheme supports up to 50% of the training, hardware and software
acquisition/leasing costs. Maximum grant is $20,000 per application. GST is not
supported. BCA reserves the right to determine the supportable items and level of
support.
5. Project Collaboration Scheme supports up to 50% of the training, consultancy,
hardware and software acquisition/leasing costs. Maximum grant is $35,000 per firm.
GST is not supported. BCA reserves the right to determine the supportable items,
level of support and which discipline(s) an applicant belongs to.
6. A ONE TIME expenditure of manpower involved in setting and implementing company
BIM deployment plan is now supported under the enhanced BIM fund. The fund will
support 50% of the expenditure of manpower capped at $10K as part of funding for
any of the 4th to 6th application. (Applicable for both schemes)
7. Collaborating firms would have to share the BIM model.
8. All fields in this form are required. Where the information is not applicable, a ‘NA” or
“NIL” is necessary.
9. For further clarification or queries, please contact Ms Angella Chan at DID: 6730 4540
or email: [email protected]
10.
Please submit the duly completed application form together with the supporting
documents as listed of the application form to [email protected]
The conclusive terms regarding the disbursement will be sent out in the Letter
of Offer and its annexes.
Application Form for BIM Fund as of February 2013
APPLICATION FORM
BUILDING INFORMATION MODEL (BIM) FUND
BIM Reference number: _____________________________________________
(For official use)
SUBMISSION CHECKLIST
For Firm Level scheme, please submit the following documents:
a. Application form;
b. Quotations (such as training, software, hardware) and
c. Training/Course outlines
For Project Collaboration scheme, please submit the following documents together with the other firm(s)'
application form and supporting documents (same as below).
a. Application form;
b. Quotations (such as training, software, hardware and hand-holding service);
c. Consultancy scope;
d. No. of consultants who will be assisting the project hand-holding; and
e. Details (CVs) of the BIM consultants who will be assisting the project hand-holding
PART 1 – APPLICANT’S DATA
ACRA or UEN Number
BOA / PEB Number:
Registered Firm Name:
Name of BOA / PEB
holder:
Block / Building
Number
Street Name
Unit Number
Building Name
Correspondence Address:
Contact Person:
Designation
Email Address:
Office No.
Fax:
Mobile No.
Postal Code
PART 2 – TYPE OF SCHEME (Please tick the scheme which you would like to
apply)
Firm Level Scheme (maximum grant of S$20,000 per application)
Project Collaboration Scheme ( maximum grant of S$35,000 per firm)
Application Form for BIM Fund as of February 2013
PART 3 – COST BREAKDOWN (excluding GST)
PART 3A: TRAINING COURSE
Name of Training Centre
Name of Training Course
Number of Trainees
Duration of Training Course
Total Training Cost
PART 3B: CONSULTANCY SERVICE (ONLY for Project Collaboration Scheme )
Name of Service Provider
Duration of Service
Total Consultancy Cost
Part 3C: HARDWARE
Name of Hardware Vendor
Type of Hardware
Number of Hardware
Total Hardware Cost
Part 3D: EXPENDITURE OF MANPOWER (ONLY applicable from 4th – 6th application for both schemes)
(Please √ accordingly if your firm is claiming as we would require documentary proof for claim submission)
o
o
Yes
No
PART 3E: SOFTWARE
Name of Software Vendor
Name of Software
Number of Software Licences
Total Software Cost
PART 4 – PROJECT INFORMATION
Project Reference No.
(e.g. A1234-00001-2011
or E1234-00001-2010)
Project Title
Project Description
Project Owner
Estimated Project Size (GFA)
Estimated Project Value
Project role of applicant
(please tick only ONE box)
Architect
Main-Contractor
C&S Consultant
Sub-Contractor
M&E Consultant
Others: ________________
PART 5 – PREVIOUS APPLICATIONS (if any)
First BIM Application Ref No.
Grant Approved:
Second BIM Application Ref No.
Grant Approved:
Third BIM Application Ref No.
Grant Approved:
Fourth BIM Application Ref No.
Grant Approved:
Fifth BIM Application Ref No.
Grant Approved:
Application Form for BIM Fund as of February 2013
PART 6 – DECLARATION BY APPLICANT
By submitting this application, I affirm that the information set forth in it is true and complete. I understand
Building and Construction Authority (BCA) reserves the right to reject any application without assigning any
reason.
Signature
Name (Mr/Ms/Mdm/Dr) (As in
NRIC)
Designation
Only the sole proprietor, partner or director of the Applicant, as
registered with ACRA or professional bodies, may sign this declaration.
Application Form for BIM Fund as of February 2013
Date
0
